If you are struggling to install your MeacoDry Arete® Wall Mounting Bracket to the wall, we have written a guide to help you out. And if written instructions aren’t for you, we have made a short video to visualise the installation process.
6 steps to installing your MeacoDry Arete® Wall Mounting Bracket:
- Before installing the wall mounting bracket, please ensure the wall can take the load of the dehumidifier and the weight of the full water tank. Also, please ensure the fixings are appropriate to the load and the wall.
- Mark where you want the bracket to be. There must be at least a 900mm gap between the wall bracket and the ceiling.
- Fix the wall bracket into place using wall fixings (not supplied). Use fixings appropriate to the load and the wall. Make sure that the wall bracket is level.
- Remove the castors from the dehumidifier (if applicable).
- Insert the vibration absorbers. Place the dehumidifier on the wall bracket allowing the screws from the vibration absorbers to go through the alignment holes on the bracket.
- Secure the dehumidifier to the wall bracket using the washer sets and nuts provided.
Meaco cannot be held responsible for the use of incorrect wall fixings or any damage to the wall.
If you require any assistance installing your Arete® wall mounting bracket, contact our Customer Service team who will be happy to help!
Email: customerservice@meaco.com
Phone: 01483 234900
LiveChat: meaco.com
